What is the ideal extraction time for an espresso?

For the advanced barista, the extraction time of an espresso is much more than just a number. It's a direct gauge for extraction and therefore for flavour. An espresso that runs through too quickly or too slowly is rarely in balance, with a bitter, sour or watery coffee as the result. But what is the ideal time? And how do you adjust your grind, tamping or dose accordingly?

What is extraction time?

The extraction time, also called brew time, is the time the water needs to flow through the ground coffee in the portafilter, from the moment you press the espresso button to the last drop falling into the cup.

This time is always measured in seconds, usually with a stopwatch or a built-in timer in the espresso machine.

Important: extraction time isn't the same as warm-up time of the machine or pre-infusion.

What is the ideal extraction time for an espresso?

The guideline for a classic espresso is between 25 and 30 seconds.

But this depends on:

• The amount of coffee (standard: 18-20 grams)
• The desired yield (usually 36-40 ml)
• The type of bean (dark vs light roasted)
• Your personal flavour preference

A few examples:

Different extraction times for ristretto and lungo

Although 25 to 30 seconds is the standard extraction time for a classic espresso, there are deliberately different extraction times for other variants like a ristretto and a lungo.

A ristretto (Italian for 'restricted') is a shorter shot where you use the same amount of ground coffee but let less water flow through, typically in 15 to 20 seconds. The result is a concentrated, syrupy shot with lots of body and less bitterness.

A lungo ('long'), on the other hand, you let run longer, often 35 to 40 seconds, which leads to a larger volume but also to a lighter, more bitter profile because more bitter compounds are extracted.

For a ristretto you ideally adjust the grind (finer), and for a lungo slightly coarser, to prevent blockage or over-extraction.

These variations aren't mistakes, but deliberate choices, often guided by flavour preference or the type of bean. The main thing is that the extraction time matches the goal you're aiming for.

How do you affect extraction time?

The three most important factors you can adjust:

1. Grind: finer grind = slower extraction. Not sure about the right setting? Read also how to set the right grind size.
2. Tamping pressure: pressing down harder slows the flow
3. Dose: more coffee in the filter = longer extraction. See also our explanation of the ideal coffee-to-water ratio.

Never change multiple variables at the same time. Start with the grind and then work on tamping and dose.

Measuring extraction time in practice

Use a scale with a timer or a separate stopwatch. Start the timer as soon as you activate the shot, and stop as soon as the desired volume is reached.

Then check:

• The time in seconds
• The weight in grams/ml
• The visual flow (should look like a thin stream of honey)

Consistent measurement is important for repeatable quality.

What if the extraction time is off?

Is your espresso structurally running too fast and do you want to dig into the causes and fixes? Read our in-depth article on why your espresso runs too fast. Recognising mistakes in your general preparation instead? Then have a look at the common mistakes when making an espresso.

Balance is the key

The ideal extraction time isn't a fixed given, but rather a guideline that helps you find balance between body, bitterness and acidity. By measuring systematically and understanding your variables, you get a grip on your espresso, and that's where the magic begins.