Water filter - compatible Brita Intenza+, Philips, Saeco, Lavazza, Gaggia (type: CA6702)

This water filter is compatible with the Brita Intenza+ cartridge CA6702/00 and fits coffee machines from Philips Saeco, Lavazza and Gaggia that work with that cartridge.

Not sure? Then check which filter is currently in your machine or consult the manual of your appliance. If a different cartridge type is listed there, you need a different filter.

All brands mentioned are the property of their respective owners and are only stated to indicate compatibility.

No. This cartridge is made for machines that work with the Brita Intenza+ filter CA6702, so for appliances from Philips Saeco, Lavazza and Gaggia. Machines that use a different cartridge need a different filter.

So always check the filter that is currently in your machine, or look in your appliance's manual before you order. The connection on the underside differs per type, and a filter that does not fit cannot be installed.

The cartridge filters 50 litres of water. That is the equivalent of about 400 cups of coffee or about 1000 cups of espresso.

Replace the filter every 2 months in any case, even if you have not reached those 50 litres yet. If your machine gives a notification sooner, follow the advice of your appliance.

Yes. Submerge the filter upside down in a vertical position in cold water and gently press on the sides until no more air bubbles escape.

Then place the cartridge in the holder of your water tank and follow the installation steps in the manual of your coffee machine.

Yes. This water filter cleans tap water of chlorine, lead and copper for example, but your machine will still build up limescale.

We advise you to descale your appliance at least 2 times a year. Always remove the water filter from the tank before you start the descaling programme.